How to Read a Nutrition Facts Label in Five Steps
By Tools Star Hub Editorial Team · Published
Quick answer: read a Nutrition Facts label from the top down. Check the serving size and servings per container first, because every number below refers to one serving. Then read calories, scan the nutrients with their percent Daily Value (%DV), and use the 5/20 guide from the US Food and Drug Administration: 5% DV or less of a nutrient per serving is low, 20% DV or more is high. Finally, multiply by the number of servings you actually eat. Alma: AI Nutrition Coach & Food Tracker lets you enter those label values as a custom food.
Labels are the most reliable nutrition data most people can get for packaged food, yet the most common logging errors come from misreading them: using the whole pack’s weight with per-serving numbers, or skipping the added sugars line.
Why should I read the serving size first?
Every value on the label refers to the serving size printed at the top, shown in a household measure such as one cup and in grams or millilitres. Servings per container tells you how many of those servings the pack holds. The FDA bases serving sizes on amounts people typically eat or drink, not on how much they should eat.
If you eat two servings, double every number. If the pack contains 2.5 servings and you finish it, multiply by 2.5. Some packages that could reasonably be eaten in one sitting show a dual-column label with values per serving and per package, which removes this step.
How do I use the calories line?
Calories show the energy in one serving. To see how a food fits your day, compare it with your own target from the TDEE Calculator rather than the general 2,000-calorie reference on the label. A 250 kcal snack is about 12% of a 2,000 kcal day but about 15% of a 1,700 kcal day.
Calories on labels are calculated from the protein, carbohydrate and fat content and rounded, so multiplying the macro grams by 4, 4 and 9 will usually come close to, but not exactly match, the printed number.
What does percent Daily Value mean?
The %DV shows how much one serving contributes to a reference daily amount of that nutrient, based on a 2,000-calorie diet used for general nutrition advice. It lets you compare products quickly without converting milligrams and grams in your head.
Use the 5/20 guide: 5% DV or less is low and 20% DV or more is high. Aim higher for nutrients many people under-consume, such as dietary fibre, vitamin D, calcium, iron and potassium. Aim lower for saturated fat, sodium and added sugars.
| %DV per serving | Meaning | Example use |
|---|---|---|
| 5% or less | Low | Pick lower sodium soup at 4% DV over 20% DV |
| 6–19% | Moderate | Fine in context of the whole day |
| 20% or more | High | Good for fibre or calcium; limit for saturated fat |
What is the difference between total sugars and added sugars?
Total sugars include sugars naturally present in foods such as milk and fruit plus any sugars added during processing. Added sugars, indented below total sugars, show only those added, including syrups, honey and concentrated juice. Added sugars carry a %DV; total sugars do not.
The Dietary Guidelines for Americans advise keeping added sugars below 10% of daily calories from age two. On a 2,000 kcal diet that is under 200 kcal, or about 50 g. Plain yoghurt with 6 g total and 0 g added sugars is very different from flavoured yoghurt with 18 g total and 12 g added.
How do I log a packaged food accurately?
Weigh what you actually eat when you can. If the label says one serving is 40 g and you pour 60 g, you ate 1.5 servings. The Unit Converter helps when a label lists ounces and your kitchen scale shows grams.
In Alma you can search Open Food Facts for packaged products or add a custom food straight from the label. For drinks, Alma handles per-100 ml values so a 330 ml can is logged correctly. Double-check that the serving you log matches the serving on the panel before saving.
Custom foods you create are kept in your browser, so a product you buy every week only needs to be typed in once. If the manufacturer changes the recipe, the label usually changes too; compare the panel with your saved entry now and then and update the calories and macros when they differ.
How do I read a label and log it in Alma?
- Find serving size and servings per container. Note the household measure and the gram or millilitre amount. Decide how many servings you will really eat.
- Read calories for one serving. Multiply by your number of servings and compare the result with your daily calorie target.
- Scan %DV with the 5/20 guide. Look for low saturated fat, sodium and added sugars, and higher fibre, vitamin D, calcium, iron and potassium.
- Check protein, carbohydrate and fat grams. These feed your macro targets. Fibre sits inside total carbohydrate on the label.
- Log it in the Food Tracker. Search the product in Alma or add a custom food with the label values, set the serving amount, and save it to the right meal.
Example
Breakfast cereal portion
The label shows 30 g per serving at 120 kcal. A typical poured bowl weighs 60 g, which is two servings and 240 kcal before any milk.
Comparing two soups
Soup A lists sodium at 32% DV per serving; Soup B lists 12% DV. Using the 5/20 guide, A is high in sodium and B is moderate, so B is the easier fit for a lower-sodium day.
Logging a canned drink
A drink lists 42 kcal per 100 ml. A 330 ml can supplies about 139 kcal (42 × 3.3). Logging it per 100 ml in Alma avoids treating the whole can as a single 100 ml serving.
What should I keep in mind?
Label rules vary by country
This guide follows the US Nutrition Facts format. Labels in the EU, UK and elsewhere often show values per 100 g and use different reference amounts.
%DV is a general reference
Daily Values are based on 2,000 kcal. Your own needs may be higher or lower, so use them to compare foods rather than as personal targets.
Educational use
If you manage a medical condition or food allergy, follow your clinician’s advice and always read the ingredient and allergen statements.
FAQ
- What is the first thing to check on a nutrition label?
- The serving size and servings per container. Every other number on the panel refers to one serving, so this step controls accuracy for the rest.
- What does 20% DV mean?
- One serving supplies 20% of the reference daily amount for that nutrient on a 2,000-calorie diet. Under the FDA’s 5/20 guide, that counts as high.
- Is the serving size the amount I should eat?
- No. Serving sizes reflect amounts people typically eat or drink. They are a reference for the numbers, not a portion recommendation.
- Why is there no %DV for total sugars or protein?
- No Daily Value is set for total sugars. Protein %DV is required only when a protein claim is made or the food is for young children, so most labels show protein in grams only.
- How many grams of added sugar is 10% of calories?
- Sugar supplies about 4 kcal per gram. On a 2,000 kcal diet, 10% is 200 kcal, or about 50 g of added sugars per day.
- Does fibre count as carbohydrate on the label?
- Yes. Dietary fibre and total sugars are both listed under total carbohydrate. If you track total carbs, use the total carbohydrate figure.
- What is a dual-column label?
- Some packs that could be eaten in one or two sittings show two columns, one per serving and one for the whole package, so you do not have to multiply.
- Why do my macro grams not multiply back to the label calories?
- Labels round each value and some ingredients, such as fibre and sugar alcohols, supply less energy than the general factors. Small differences are normal.
- How do I log food when I eat part of a package?
- Weigh the portion and divide by the gram serving size to get the number of servings, then log that amount. Alma accepts fractional servings, or you can log the portion directly in grams or millilitres.
- Can I add a packaged food that is not in the database?
- Yes. In Alma’s Food Tracker you can create a custom food from the label values and reuse it later from your browser’s saved list.
Log packaged foods from the label or Open Food Facts in Alma: AI Nutrition Coach & Food Tracker.
Turn label grams into daily goals with How to calculate macros.
Set a personal calorie target in the TDEE Calculator.
Convert ounces and grams with the Unit Converter.